購物滿 HKD 500.00即享免運費優惠！（適用於 本地送貨、本地取貨 )

詳情

顧客凡購物滿HKD 500.00即享運費減免優惠（適用於 本地送貨、本地取貨 )。金額會於結帳時自動扣除，有效期至 09/01/2030。
Businesspro Mall

Monk Makes Sensor Board for micro:bit 聲音,溫度和光度感應器 (行貨1年保養)

HKD 98.00HKD 88.00

數量

剩餘： 49

簡介

+ The MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level. Sound The Sensor for micro:bit uses a MEMs (microphone on a chip) and a pre-amplifier. The output of the sound sensor is connected to an analog input where it can be sampled. The sound signal varies about the 1.5V level. So, silence will produce an analog output of around 1.5V. When there is sound the analog readings will oscillate above and below the 1.5V level like this: This is why 511 is subtracted from the readings in the code examples below. JavaScript Blocks Editor Here is an example of using the Sensor Board to display a bargraph to indicate the sound level. Click on the image below to try it out. Making a noise into the microphone will make the LEDs dance. Temperature The Sensor for micro:bit uses a thermistor to measure temperature. The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit. The calculations for converting this voltage reading to an actual temperature are quite complicated and so the code examples here will only give a rough idea of temperature. If you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32. JAVASCRIPT BLOCKS EDITOR This is an example of using the Sensor Board to display the temperature, try putting your finger on the temperature sensor to warm it up. You can run the example below by clicking on it. Light The light sensor uses a phototransistor to measure the light level and produces an output voltage that increases as the light level increases. Here is a guide to the kind of light level you might get from the sensor under different conditions (0 to 1023). Dark 0 to 3 Dimly lit room 6 to 10 Indoors directly under a light 10 to 50 Outdoors (dull day) 100 to 200 Outdoors (sunny day) 800 to 900 Even though the maximum analog read value is 1023, the maximum reading from this sensor is around 900. JAVASCRIPT BLOCKS EDITOR Here is an example of using the Sensor Board to display a bargraph to indicate the light level. Click on the image below to try it out. Put your finger over the light sensor to make it dark or shine a flash-light onto it to make more LEDs light up.

付款、送貨及退貨

+

送貨方式

  • 香港 本地送貨
  • 順豐速運自取服務
  • 香港 本地取貨
  • 實體店自取

付款方式

  • 支付寶HK
  • 信用卡
  • PayMe
  • 支付寶
  • 轉數快
  • 銀行轉帳

退貨及退款政策

貨品將於訂單確認後 1 至 5 個工作天內寄出，寄出後大概 2 至 5 日內收到。所有郵寄項目不可指定收貨日期和時段，顧客請於購買時輸入正確的個人資料和地址以便安排運送。 所有產品均設有一年或以上本地保養，且享有7日內有壞包換購物保障 (不包括人為損壞並須要保留完整包裝)。如需換貨，請於收到貨物後7日內聯絡 9245 8386 或電郵至 sales@businesspro.asia安排售後服務。 如請求退貨換貨，商品退回及再次寄出的運費將由客人自行負擔。請保留及退回所有包裝，包括貨品原裝包裝盒、商品原標籤等。 貨品上的標籤或吊牌必須保持完整，如有破壞或折曲均不能退換。所有退還款項只能退還至原先的支付帳戶中，需時約7個工作天。 如果遇到任何糾紛，Businesspro Service Limited將保留最終的決定權。

你可能感興趣的商品